This collection celebrates the beauty of natural wood with the performance of porcelain. Each surface shows authentic grain, gentle variation, and a calm organic character drawn from nature. You get the inviting look of wood with an easy care finish that suits modern living.
| Standard size | 1200x200mm |
| Thickess | 10mm, 20mm |
| Bespoke sizing | Available |
| Material | Porcelain |
Depending on your application, we can help you with finishing edge profiles, such as bull nose edge on stairs.
Feel free to contact one of our consultants to achieve your desired finishes.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Unlike real wood, porcelain does not swell, warp, or fade. It resists water, stains, scratches, and UV exposure. It does not need sealing or polishing and it stands up to high footfall in homes, hotels, and outdoor areas. The result is a long lasting finish that keeps its colour and clarity through seasons and daily use.
Indoors it brings warmth and texture to living rooms, bedrooms, kitchens, and hallways, creating a natural flow throughout the home. Outdoors its strength and slip resistance make it ideal for patios, terraces, pool decks, and walkways. It is equally suited to cafés, boutiques, and resorts, offering the charm of wood with the endurance porcelain is known for.
Guided by the timeless beauty of oak, this collection captures the story of the tree through four distinct shades that echo its life cycle. From the fresh lightness of new growth to the mellow mid tones of matured timber, through deeper seasoned hues and finally the rich character of aged oak, each shade reflects a phase of the oak tree and brings nature’s narrative into your space.
| Solar Refelective Index | |||
|---|---|---|---|
| Test Name | Unit | Test Method | Results |
|---|---|---|---|
| Solar Direct Reflectance | % | ASTM E 903:12 | 72.0 |
| Normal Emissivity | % | EN 673:2011 | 0.92 |
| Corrected Emissivity | % | EN 673:2011 | 0.84 |
| SRI for low wind condition | % | ASTM E 1980:11 | 88.5 |
| SRI for medium wind condition | % | ASTM E 1980:11 | 87.67 |
| SRI for high wind condition | % | ASTM E 1980:11 | 87.25 |
| PROPERTIES | TEST METHOD | REQUIREMENTS | 10MM THICKNESS RESULTS | 20MM THICKNESS RESULTS | ||
|---|---|---|---|---|---|---|
| Dimension & surface quality | Length & width | GB/T 3810.2-2016 | N≥15cm | ±0.6% | -0.01%~+0.01% | -0.03%~0 |
| ±2.0mm | -0.01%~+0.01% | -0.02mm~0 | ||||
| Thickness | GB/T 3810.2-2016 | N≥15cm | ±5% | -0.9%~+0.1% | +0.4%~+0.9% | |
| ±0.5mm% | -0.1mm~0 | +0.1%~+0.2mm | ||||
| Straightness of sides | GB/T 3810.2-2016 | N≥15cm | ±0.6% | -0.01%~+0.01% | -0.03%~0 | |
| ±2.0mm | -0.01%~+0.01% | -0.02mm~0 | ||||
| Rectangularity | GB/T 3810.2-2016 | N≥15cm | ±0.5% | -0.11%~+0.1% | +0.09%~+0.10% | |
| ±2.0mm% | -0.7mm~0.6mm | +0.09%~+0.10% | ||||
| SURFACE FLATNESS | ||||||
| a) Centre curvature, related to diagonal calculated from the work size | GB/T 3810.2-2016 | N≥15cm | ±0.5% | -0.04% | +0.01%~+0.02% | |
| ±2.0mm% | -0.4mm~0.3mm | +0.1%~+0.2mm | ||||
| b) Edge curvature, related to the corresponding work sizes | GB/T 3810.2-2016 | N≥15cm | ±0.5% | -0.08%~-0.07% | +0.05%~+0.07% | |
| ±2.0mm% | -0.5mm~0.4mm | +0.3mm~+0.4mm | ||||
| c) Warpage, related to diagonal calculated from the work size | GB/T 3810.2-2016 | N≥15cm | ±0.5% | -0.06%~+0.06% | +0.08%~+0.07% | |
| ±2.0mm% | -0.5mm~+0.5mm | +0.7mm~-0.6mm | ||||
| Surface Quality | GB/T 3810.2-2016 | A minimum of 95% of the tiles are to be free from visible defects which can impair the appearance of a major area of tiles. | 100% | 100% | ||
| Physical Properties | ||||||
| Water absorption Percent mass fraction | GB/T 3810.3-2016 3810.3-2016 3810.3-2016 | E≤0.5% | ±0.5% | 0.08% | 0.21% | |
| Individual maximum 0.6% | ±2.0mm% | 0.06%~0.10% | 0.16%~0.31% | |||
| Breaking strength, in N | GB/T 3810.4-2016 | ≥1300 | 6233 | 7858 | ||
| Modulus of rupture, in N/mm² applicable to tiles with breaking strength ≥3000N | GB/T 3810.4-2016 | Minimum ≥35 | ----------- | ----------- | ||
| Individual minimum 32 | ----------- | ----------- | ||||
| Abrasion resistance Resistance to surface abrasion of glazed tiles intended for use on floors | GB/T 3810.7-2016 | Report abrasion class | Class 4 | Class 4 | ||
| Report cycles passed | 2100 | 6000 | ||||
| Crazing resistance: | GB/T 3810.11-2016 | Required | Fully resistant | Fully resistant | ||
| Frost resistance | GB/T 3810.12-2016 | Required | Fully resistant | Fully resistant | ||
| Coefficient of friction: | Annex M | Individual ≥0.50 | 0.77~0.78 | 0.84~0.85 | ||
| PROPERTIES | TEST METHOD | REQUIREMENTS | 10MM THICKNESS RESULTS | 20MM THICKNESS RESULTS | |
|---|---|---|---|---|---|
| Chemical Properties | |||||
| RESISTANCE TO STAINING | |||||
| a) Green staining agent in light oil | GB/T 3810.14-2016 | Minimum Class 3 | Class 4 | Class 5 | |
| b) Red staining agent in light oil | GB/T 3810.14-2016 | Minimum Class 3 | Class 4 | Class 5 | |
| c) Iodine, 13g/L solution in alcohol | GB/T 3810.14-2016 | Minimum Class 3 | Class 5 | Class 5 | |
| d) Olive oil | GB/T 3810.14-2016 | Minimum Class 3 | Class 5 | Class 5 | |
| RESISTANCE TO HOUSEHOLD CHEMICALS AND SWIMMING POOL SALTS | |||||
| Household chemicals: Ammonium chloride, 100g/L | GB/T 3810.13-2016 | Minimum GB | GA | GA | |
| Swimming pool salts: Sodium hypochlorite solution, 20mg/L | GB/T 3810.13-2016 | Minimum GB | GA | GA | |
| RESISTANCE TO LOW CONCENTRATIONS OF ACIDS AND ALKALIS | |||||
| a) Hydrochloric acid solution, 3% (v/v) | GB/T 3810.13-2016 | Manufacturer to state classification | GLA | GLA | |
| b) Citric acid solution, 100g/L | GB/T 3810.13-2016 | Manufacturer to state classification | GLA | GLA | |
| c) Potassium hydroxide, 30g/L | GB/T 3810.13-2016 | Manufacturer to state classification | GLA | GLA | |
| RESISTANCE TO HIGH CONCENTRATIONS OF ACIDS AND ALKALIS | |||||
| a) Hydrochloric acid solution, 18% (v/v) | GB/T 3810.13-2016 | Manufacturer to state classification | GLA | GLA | |
| b) Lactic acid 5% (v/v) | GB/T 3810.13-2016 | Manufacturer to state classification | GLA | GLA | |
| c) Potassium hydroxide, 100g/L | GB/T 3810.13-2016 | Manufacturer to state classification | GLA | GLA | |
| Chemical Properties | ----------- | DIN 51130:2014 | ----------- | Mean overall acceptance angle: 34.5” | Mean overall acceptance angle: 37.5” |
| Slip resistance assesment group: R12 | Slip resistance assesment group: R12 | ||||
This collection celebrates the beauty of natural wood with the performance of porcelain. Each surface shows authentic grain, gentle variation, and a calm organic character drawn from nature. You get the inviting look of wood with an easy care finish that suits modern living.
| Standard size | 1200x200mm |
| Thickess | 10mm, 20mm |
| Bespoke sizing | Available |
| Material | Porcelain |
Depending on your application, we can help you with finishing edge profiles, such as bull nose edge on stairs.
Feel free to contact one of our consultants to achieve your desired finishes.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Water jet cutting technology applying on 2cm porcelain tiles, it will effectively solve the difficult problem due to dredge waterways.
Unlike real wood, porcelain does not swell, warp, or fade. It resists water, stains, scratches, and UV exposure. It does not need sealing or polishing and it stands up to high footfall in homes, hotels, and outdoor areas. The result is a long lasting finish that keeps its colour and clarity through seasons and daily use.
Indoors it brings warmth and texture to living rooms, bedrooms, kitchens, and hallways, creating a natural flow throughout the home. Outdoors its strength and slip resistance make it ideal for patios, terraces, pool decks, and walkways. It is equally suited to cafés, boutiques, and resorts, offering the charm of wood with the endurance porcelain is known for.
Guided by the timeless beauty of oak, this collection captures the story of the tree through four distinct shades that echo its life cycle. From the fresh lightness of new growth to the mellow mid tones of matured timber, through deeper seasoned hues and finally the rich character of aged oak, each shade reflects a phase of the oak tree and brings nature’s narrative into your space.
| Solar Refelective Index | |||
|---|---|---|---|
| Test Name | Unit | Test Method | Results |
|---|---|---|---|
| Solar Direct Reflectance | % | ASTM E 903:12 | 72.0 |
| Normal Emissivity | % | EN 673:2011 | 0.92 |
| Corrected Emissivity | % | EN 673:2011 | 0.84 |
| SRI for low wind condition | % | ASTM E 1980:11 | 88.5 |
| SRI for medium wind condition | % | ASTM E 1980:11 | 87.67 |
| SRI for high wind condition | % | ASTM E 1980:11 | 87.25 |
